A Stepwise Guide To Properly Using A Bathroom Plunger

• Post author:admin
• Post published:January 24, 2022
• Post category:A Better Plumber Blog

FacebookTwitterEmail

When your toilet is backed up and overflowing, the only thing you can do is grab a bathroom plunger and hope for the best. If you’ve never used a plunger before, or if you’re not sure how to use it properly, don’t worry – we’re here to help. This step-by-step guide by A Better Plumber and Sewer in Schaumburg, IL, will show you how to unclog your drain using a plunger.

The Function of a Plunger

A plunger is used to clear blockages from drains and pipes. The plunger creates a vacuum seal over the drain, forcing the air and water through the line, clearing the jam. There are two types of plungers – cup plungers and flange plungers.

Cup Plunger vs. Flange Plunger

Cup plungers have a large cup-shaped head, while flange plungers have a small cup-shaped authority that charges that flared rim. Cup plungers are better for clearing blockages in larger drains, while flange plungers are more effective at clearing more minor blockages.

How to Use a Plunger

1. Fill up the sink with water until it covers the drain. This will help create a better seal and increase the plunger’s effectiveness.

• Place the plunger over the drain so that it covers the entire opening.
• Make sure the plunger is wet before using it. This will help create a good seal.
• Place the plunger on the drain so that the cup or flange covers the opening completely.
• Push the plunger down, then pull it up; perform this motion repeatedly, making sure to create a tight vacuum seal over the drain opening.
• After several minutes of vigorous plunging, remove the plunger and check to see if the drain is clear. If it is not, repeat the process.
• Once the drain is cleared, run hot water through it for a few minutes to flush out any remaining debris.

Tips to Create a Good Seal with the Plunger

The most important thing to remember when using a plunger is to create a good seal over the drain. If the seal is not good, the plunger will not be effective. To create a good seal, fit the plunger over the drain and push it down so that the cup or flange covers the entire opening. Ensure that the plunger is wet before plunging, which will help create a better seal.

The Gist

A clogged drain is a hassle, but with the help of a plumbing company, it can be cleared quickly and efficiently. If you are having trouble unclogging your drain using a plunger, or if the plunger doesn’t seem to be working, call A Better Plumber and Sewer serving Schaumburg, IL. We have 25 years of experience in commercial and residential plumbing services. All our services are licensed, insured, and bonded. Our team is available 24/7 to assist you. Let us know your plumbing issue and request a free quote.

Posted in Uncategorized | No Comments »